Instruments List

Gilson 223 Sample Changer

Gilson 223 Sample Changer

Programmable sampler for automated sample preparation and transfer. The 223 Sample Changer is the perfect solution for protocols such as serial dilutions, addition of samples, sampling into vials, timed reactions and tube-to-tube transfers.
Ideal for automated transfer of samples in analytical techniques like FIA and spectroscopy (UV/Vis, AA, ICP). Level-sensing and user-selectable rinsing parameters help eliminate sample contamination due to carryover.

  • Operate with the Minipuls 3 Pump or the 402 Syringe Pump.
  • Accommodates a maximum of 432 vials (7 x 40 mm or 10 x 75 mm)
  • Choose from a wide variety of probe designs and standard and custom racks
  • Optional flow-through rinse station available
  • New spring-loaded probe is ideal for low- and sub-microliter liquid handling applications including MALDI plate preparation

Specifications
Manufacturing Standards Meets applicable safety and EMC certification standards; UL and CE certified

  • Arm Speed X/Y: 25 cm/sec (9.9 in./sec) : Z: 2.0, 3.0, 6.2, 12.7, 24.7 cm/sec (0.79, 1.18, 2.44, 5.00, 9.72 in./sec)
  • Communication Interface RS-232 or GSIOC; Four inputs (contact closure, TTL, or open-collector), four relay outputs and one switched +12V DC (500 mA max.) output
  • Liquid Handling Reproducibility:
    • 0.8% CV at 10 µL
    • Accuracy: 98.2% at 10 µL
  • Front Panel One yellow LED indicator light
  • Horizontal Motion Strength X: 2 kg (5 lbs.) Y: 1.5 kg (3 lbs.)
  • Maximum Number of Vials 432 (7 x 40 mm or 10 x 75 mm)
  • Number of Racks Up to four Code 20- or 30-Series racks
  • Power Requirements Frequency: 50–60 Hz
  • Voltage: 90–120 or 220–240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage
  • Current rating: one 2.0A fuse for 100–120V or two 2.0A fuses for 220–240V
  • Probe Positioning Performance Accuracy: ±1 mm in X/Y/Z dimensions
  • Repeatability: ±0.25 mm in X/Y/Z dimensions
  • Probe Rinse Through a dedicated rinse station for rinsing the inside and outside of the probe
  • Sampler Type X/Y/Z with stationary rack design
  • Software Via Gilson TRILUTION™ Software
  • Vertical Punch Strength 1 kg (2 lbs.)
  • Dimensions (w x d x h*) 53.5 x 43.7 x 60* cm (21.1 x 17.2 x 24* in.)
  • Weight 18.6 kg (41 lbs.)

*Maximum height. Z-arm height is adjustable to accommodate vessel heights between 1 and 150 mm (dependent on installed Z-arm).




Produktgruppe

Pharmaceutical

Environmental

Clinical/Forensic

Fractioncollectors

Liquid Handlers - Cartesian Robots

Kontakt

Biolab A/S
Sindalsvej 29
8240 Risskkov
Telefon: 86 21 28 66
E-mail: sales@biolab.dk