Clinical/Forensics Instruments

Gilson GX-241 Liquid Handler

GX-241 Liquid Handler




Small in size... BIG on performance and flexibility!



Introducing the GX-241 Liquid Handler. A compact workhorse that provides the perfect balance of size, performance, and capabilities to individual labs!


Ideally suited for applications and labs where bench space is at a premium, the GX-241 Liquid Handler features a large injection volume range of 1 µL to 5 mL using a minimal dead volume direct injection design. The GX-241 also features two transfer ports for delivering sample to off-bed detection devices in Flow Injection Analysis (FIA). This two rack capacity liquid handler has the ability to hold hundreds of samples ranging from 2 mL vials to 100mm test tubes. The flexible platform can also hold up to 4 shallow or deep well 96 well microplates.

FEATURES:

Compact Footprint with 2 Rack Capacity (see Gilson Liquid Handler Footprint Comparison to the right)
Direct Injection Module
New Compact GX Syringe Pump
Two Transfer Ports for Delivering Liquids to Off-Bed Devices
2-Character Digital LED Display
+ I/O Input and Output

BENEFITS:


Functional Capacity in only 39 cm of linear bench space that can accommodate up to 4 shallow or deep well plates
Direct Injection port delivers sample directly to the valve with minimal dead volume and no connecting tubing, reducing carryover/contamination and plugging potential
Compact GX Syringe Pump - Syringe volumes: 100 µL - 10 mL
Perform Flow Injection Analysis to conductivity, fluorescence, colorimeter, and absorbance detectors
Display provides error codes and gives user indication of maintenance requirements
Allows connectivity to third-party devices

 

 

Specifications

Technical Specifications

Definition
Sampler Type Small Footprint X/Y/Z with stationary rack design

Probe Positioning Performance

Accuracy: +/- 0.75 mm in X/Y/Z dimensions

Repeatability: +/- 0.20 mm in X/Y/Z dimensions

Arm Speed

0-350 mm/sec (300 mm/sec default) in X and Y dimensions

0-150 mm/sec (125 mm/sec default) in Z dimension

Horizontal Motion Strength 0.3 kg (0.7 lbs)
Vertical Punch Strength 1.8 kg (4 lbs)
Probe Rinse Probe rinsing occurs through a dedicated rinse station with static and flowing rinse capabilities
Number of Racks Two Code 33X-series (short) or Code 34X-series (short) or one of each
Front Panel Two digit display and indicator lights for Power and Error
Contact Control

Four inputs (contact closure, TTL), two relay outputs, and two switched +24V DC 1A outputs

Switching voltages higher than 30V or greater than 1 Amp of current may damage the instrument

Communication Ethernet
Software Control Computer control via Ethernet and TRILUTION® LH Software
Environmental Conditions

Indoor Use Only

Alltitude: Up to 2000m

Temperature range: 5º - 40ºC

Humidity: Maximum relative humidity 80% for temperatures up to 31ºC, decreasing linearly to 50% relative humidity at 40ºC

Safety and Compliance The liquid handler has been certified to safety standards required in Canada (UL), Europe, and the United States (CE & RoHS). Refer to the instrument rear panel label and the Declaration of Conformity document for the current standards to which the instrument has been tested.
Power Requirements

GX-241 Liquid Handler

Voltage: 24V DC

Current rating: 2.0A

Power Supply

Voltage: 24V DC

Current rating: 6.25 Amp, 150 Watts

Dimensions*

(W x D x H) *with Z-Arm installed and connected

39 x 50 x 47 cm (15.4 x 19.8 x 18.5 in)

Weight*

*with Z-Arm installed

7.7 kg (17 lbs)
Technical Specifications - GX-241 Liquid Handler



Produktgruppe

Pharmaceutical

Environmental

Clinical/Forensic

Autoinjectors

HPLC Systems

Instruments

Liquid Handlers - Cartesian Robots

Kontakt

Biolab A/S
Sindalsvej 29
8240 Risskkov
Telefon: 86 21 28 66
E-mail: sales@biolab.dk