Pharmaceutical Instruments

Gilson PLC 2020 Personal Purification System

The PLC 2020 Personal Purification System
The PLC 2020 Personal Purification System is a fully-functioning purification system in a small, compact footprint intended to support an individual or a small group of chemists.
It is designed for all levels of purification, from high pressure reverse phase chromatography to FLASH. In response to the growing need for easy-to-use, self-contained systems, the PLC 2020  Personal Purification System was developed to meet the demand for quick and easy purification without sacrificing accuracy.

It's your chemistry … Make it Personal!

  • Dual, variable wavelength UV/VIS detection from 190–700 nm
  • Interchangeable flow cell design to accommodate a wide variety of applications
  • Select between five different solvents
  • Interchangeable pump heads allow the option to select optimum flow range.
  • Real-time, graphical gradient modifications and real-time sample tracking during run
  • Manual fraction collection functions for Advance and Divert
  • Conditional logic fraction collection based on up to two detector channels using any combination of Slope and/or Level
  • Auto-Print and Auto-Export of sample reports at the end of a run

A fully functioning purification system in a small, compact footprint, the PLC 2020 Personal Purification system was developed in response to the growing need for an easy-to-use, self contained system to handle a chemists purification needs on a more personal level. The PLC 2020 Personal Purification System is ideally suited for low-throughput, high pressure purification needs and is intended to support an individual or small group of chemists.

Read more on this PLC2020 Blog : http://plc2020.wordpress.com/

PLC 2020 Personal Purification System Specifications

Detector

(dual, variable)

Range: 190–700 nm

Spectral bandwidth: 9 nm

Setting accuracy: ±2 nm

Setting precision: ±0.2 nm

Pumping System 25SC Pump Head
Flow: 1–25 mL/min

Pressure: 4060 psi (280 bar)

50SC Pump Head
Flow: 1–50 mL/min

Pressure: 2030 pis (140 bar)

100SC Pump Head Flow: 1–100 mL/min

Pressure: 1015 psi (70 bar)

Flow Rate Accuracy: ±1% of requested composition

Minimum Flow Rate Adjustment: 0.01% of pump head size

Mixing Volume: 2.87 mL

Composition Accuracy: ±2%

Gradient Linearity: 1-99% using Pump B

Solvent Selection Up to 4 solvents selectable on Pump B

20 µm inlet solvent filter

Injection Electronically-actuated manual injection valve (0.030" bore)

Loop Sizes 20 µL–5 mL (or larger)

Injection Syringe 1 mL or 10 mL syringe (20 gauge disposable or reusable needles)

Fraction Collection Valve Valve Volumes: 126.5 µL internal volume; <5 µL dead volume from common port to normally closed port

Flow Rate: 200 mL/min

Valve Switching Speed: <20 msec

Liquid Switching Material: PTFE and 316 Stainless Steel

Fraction Capacity
(3 Racks)

13 x 100 mm (240) test tubes

15 x 45 mm (144) test tubes

16 x 100 mm (132) test tubes

16 x 150 mm (132) test tubes

18 x 150 mm (132) test tubes

20 and 40 mL (42) Scintillation vials

Custom racks available

System Controller Chemical resistant 10" WSVGA TFT Touch Panel PC

5-wire resistive touchscreen

1.6 GHz Intel Atom processor

2 GB of RAM

160 GB internal hard drive

Dimensions
(w x d x h)
42.5 x 57.5 x 75 cm
17 x 23 x 30 in.





Produktgruppe

Pharmaceutical

Clinical/Forensic

HPLC Pumps

HPLC Systems

Instruments

Protein Purification systems

Kontakt

Biolab A/S
Sindalsvej 29
8240 Risskkov
Telefon: 86 21 28 66
E-mail: sales@biolab.dk